5
For devices with 7-16 connectors
(see Adapters section for information about the Agilent
11906B 7-16 to Type-N adapter kit)
Mechanical calibration kits
❐ 85038A standard: 30 kHz to 7.5 GHz. Includes:
85038-80002 7-16 (f) open
85038-80003 7-16 (m) open
85038-80004 7-16 (f) short
85038-80005 7-16 (m) short
85038-80006 7-16 (f) fixed load
85038-80007 7-16 (m) fixed load
8710-2175 torque wrench
8710-2174 open-end wrench
❐ 85038F economy: 30 kHz to 7.5 GHz. Includes:
85038-80002 7-16 (f) open
85038-80004 7-16 (f) short
85038-80006 7-16 (f) fixed load
11906-80016 7-16 (f) to 7-16 (f) adapter
❐ 85038M economy: 30 kHz to 7.5 GHz. Includes:
85038-80003 7-16 (m) open
85038-80005 7-16 (m) short
85038-80007 7-16 (m) fixed load
11906-80015 7-16 (m) to 7-16 (m) adapter
Electronic calibration kits
❐ 85098B RF ECal: 30 kHz to 7.5 GHz. Includes:
85098-60005 7-16 (m) to 7-16 (f) RF ECal module
❐ Option 00F substitutes module with:
85098-60007 7-16 (f) to 7-16 (f) RF ECal module
❐ Option 00M substitutes module with:
85098-60006 7-16 (m) to 7-16 (m) RF ECal module
❐ Option 00A adds:
11906-80015 7-16 (m) to 7-16 (m) adapter
11906-80016 7-16 (f) to 7-16 (f) adapter
Verification Kits
All Agilent Technologies verification kits include:
• precision Z
°
airline
• mismatched airline
• fixed attenuators
• traceable measured data and uncertainties
❐ 85055A 300 kHz to 18 GHz Type-N kit
Includes attenuators and mismatch attenuator with data
on a 3.5 inch disk for use in confirming accuracy enhanced
system measurement performance, traceable to national
standards. Test procedure is provided in the service manual.
❐ 85053B 300 kHz to 26.5 GHz 3.5 mm kit
Includes attenuators and mismatch attenuator with data
on a 3.5 inch disk for use in confirming accuracy enhanced
system measurement performance, traceable to national
standards. Test procedure is provided in the service manual.
To Next Page
Loading...
