6
Adapters
❐ 11853A 50 ohm Type-N accessory kit. Includes:
1250-1472 Type-N (f) to Type-N (f) adapter (two included)
1250-1475 Type-N (m) to Type-N (m) adapter (two included)
11511A Type-N (f) short
11512A Type-N (m) short
❐ 11878A Type-N to 3.5 mm adapter kit. Includes:
1250-1744 3.5 mm (f) to Type-N 50 ohm (m) adapter
1250-1743 3.5 mm (m) to Type-N 50 ohm (m) adapter
1250-1745 3.5 mm (f) to Type-N 50 ohm (f) adapter
1250-1750 3.5 mm (m) to Type-N 50 ohm (f) adapter
❐ 11524A 7 mm to Type-N (f) adapter
❐ 11525A 7 mm to Type-N (m) adapter
❐ 11906A 7-16 to 7-16. Includes:
7-16 (m) to 7-16 (m) adapter
7-16 (f) to 7-16 (f) adapter
7-16 (m) to 7-16 (f) adapter (two included)
❐ 11906B 7-16 to Type-N. Includes:
Type-N (m) to 7-16 (m) adapter
Type-N (f) to 7-16 (f) adapter
Type-N (f) to 7-16 (m) adapter
Type-N (m) to 7-16 (f) adapter
❐ 11854A 50 ohm BNC accessory kit. Includes:
1250-0929 BNC (m) short
1250-1473 BNC (m) to Type-N (m) adapter (two included)
1250-1474 BNC (f) to Type-N (f) adapter (two included)
1250-1476 BNC (f) to Type-N (m) adapter (two included)
1250-1477 BNC (m) to Type-N (f) adapter (two included)
General accessories
Probe
❐ 85024A high-frequency probe
Provides high-impedance in-circuit test capability from 300
kHz to 3 GHz.
Power meters and sensors
Recommended for self support, adjustments and performance
tests to verify proper instrument operation.
❐ E4418B single-channel power meter
❐ E4419B dual-channel power meter
❐ 8482A power sensor, 100 kHz to 4.2 GHz, Type-N (m),
100 mW
❐ E4412A CW power sensor, 10 MHz to 18 GHz, Type-N (m),
200 mW
Amplifiers
1
❐ 8347A RF power amplifier, 100 kHz to 3 GHz, 25 dB gain,
power out: +20 dBm
❐ 83006A power amplifier, 10 MHz to 26.5 GHz, 20 dB gain,
power out: +18dBm to 10 GHz or +16 dBm to 20 GHz or
+14 dBm to 26.5 GHz
❐ 83017A power amplifier, 50 MHz to 26.5 GHz, 25 dB gain,
power out: +20 dBm to 20 GHz, or +15 dBm to 26.5 GHz
❐ 83018A power amplifier, 2 to 26.5 GHz, 27 dB gain to 20
GHz or 23 dB to 26.5 GHz, power out: +24 dBm to 20 GHz
or +21 dBm to 26.5 GHz
❐ 83020A power amplifier, 2 to 26.5 GHz, 30 dB gain to
20 GHz or 27 dB to 26.5 GHz, power out: +30 dBm to
20 GHz or +26 dBm to 26.5 GHz
Couplers
❐ 87300B coaxial coupler, 1 to 20 GHz, SMA (f), 10 dB
coupling
❐ 87300C coaxial coupler, 1 to 26.5 GHz, 3.5 mm (f), 10 dB
coupling
Equipment racks and case
❐ 5063-9223 rack mount flange kit, for use with handles;
includes handles
2
❐ 5063-9216 rack mount kit, for use without handles; may
be ordered as option 1CM
❐ 5063-9236 rack mount kit, for use with previously
supplied handles; may be ordered as option 1CP
❐ E3663AC rail kit, included with option 1CM and 1CP.
❐ 9211-2658 transit case
1. RF connectors: 3.5 mm (f) on RF input and output; BNC (f) detector out.
Type-N (f) on RF input and output for 8347A
2. A PNA Series analyzer is supplied with handles.
To Next Page
Loading...
