Agilent Technologies EasyEXPERT

5 MCSMU_IV
[Extended Test Parameters]
HoldTime: Hold time
PulseAvgCnt: Pulse averaging count
GatePulseBase: Gate pulse base voltage
IgLimit: Gate current compliance
DrainPulseBase: Drain pulse base voltage
YAxisIdMin: Minimum value of Y-axis: Log Id
RecordRawData: Switch if to save the raw sweep data
[Measurement Parameters]
Drain current Idrain
[User Function]
gfs: Forward transconductance gfs=diff(Idrain,Vgate)
Ta: Temperature Ta=Temp
[Analysis Function]
gfsMax=max(gfs)
Vth=@L1X (X intercept of Line1)
[Auto Analysis]
Line1: Tangent for Y2 data at the point of gfs=gfsMax
[X-Y Plot]
X axis: Gate voltage Vgate (LINEAR)
Y1 axis: Forward transconductance gfs (LINEAR)
Y2 axis: Drain current Idrain (LINEAR)
Y3 axis：Drain current Idrain (LOG)
[List Display]
Drain voltage Vdrain
Drain current Idrain
Gate voltage Vgate
Forward transconductance gfs
[Parameter Display Area]
Temperature Ta=Temp
Maximum value of forward transconductance gfsMax
Threshold voltage Vth
Agilent EasyEXPERT Application Library Reference, Edition 8
5-8