15 Structure
[Extended Test Parameters]
HoldTime: Hold time
DelayTime: Delay time
AnodeMinRng: Minimum range for the anode current measurement
[Junction Capacitance Measurements: Measurement Parameters]
Parallel capacitance Cp
Conductance G
[Junction Capacitance Measurements: X-Y Plot]
X axis: Anode voltage (LINEAR)
Y1 axis: Junction capacitance Cp (LINEAR)
Y2 axis: Conductance G (LINEAR)
[Junction Capacitance Measurements: List Display]
Impedance Z
Phase Theta
Series capacitance Cs
Series resistance Rs
Parallel resistance Rp
Dissipation factor D
Reactance X
Capacitance per junction unit area Cp_S
[Junction Capacitance Measurements: Parameters Display Area]
Zero bias capacitance value Cj0
[Breakdown Voltage Measurements: Measurement Parameters]
Anode current
For the anode terminal, the SMU current compliance is set to Ianode@BD*1.1.
[Breakdown Voltage Measurements: User Function]
Anode current per junction unit area Ianode_S
[Breakdown Voltage Measurements: X-Y Plot]
X axis: Anode voltage (LINEAR)
Y1 axis: Anode current (LOG)
[Breakdown Voltage Measurements: Parameters Display Area]
Junction breakdown voltage BV
Zero bias capacitance value Cj0
Agilent EasyEXPERT Application Library Reference, Edition 8
15-17
To Next Page
Loading...