2 CMOS
[Parameters Display Area]
SlopeMin: minimum Slope value
Ion: on current (drain current at Vg=VgStop)
Ioff: off current (drain current at Vg=0)
[Auto Analysis]
Line1: Horizontal line through the Y1 data at Vgate=Vd(=VgStop)
Line2: Horizontal line through the Y1 data at Vgate=0
Marker: Point of Slope=SlopeMin
Agilent EasyEXPERT Application Library Reference, Edition 8
2-37
To Next Page
Loading...