Agora Models RM 857 - Page 25

5
5
Fit the window pane
95F on the inside of the
right wall framework 95A,
beneath the sliding window.
Fix in place with four OP
screws, so that the screws go
through to frame 95D. The
inset below shows the
framework assembled.
9
6
6
Fit the window winder 95C into the hole in
the window bar 95B. Position the bar on the
outside of the lower deck of the assembled model
(48B), across the window opening adjacent to the
framework that was fitted in stage 94 (inset).
OP
x4
95A
95F
95D
95B
48B
95B
95C
25
25
AGORAMODELS ROUTEMASTER BUS