5 6
6
Identify the fixing points for the handle 91B on the frame
91A, adjacent to the sliding window. Note that a peg on
the handle fits into a socket on the frame 91A. Make sure it is
the right way round. Fix in place with two NM screws.
5
Fix the upper part of the window frame 91E to the
framework 91A, from the inside, with two BP
screws.
A non-opening window and a
sliding window have been fitted
to the section of the left lower-
deck framework.
91E
NM
x2
91B
91A
91A
BP
x2
5
5
AGORAMODELS ROUTEMASTER BUS
To Next Page
Loading...
