03 04
03 04
Fit the connector piece 32-02 in place across the join
between parts 25-01 and 32-01 so that the raised
screw holes fit into the sockets in part 32-02.
Fix part 32-02 in place with two PM screws.
Take the front superstructure assembly along with life
raft part 32-03 (marked L on the back). After test
fitting, use a little superglue to fix in place on the port
side of the bridge deck as shown in the photo.
Turn the superstructure around and use a little
superglue to fix the starboard life raft 32-04 (marked
R on the back) in place on the starboard side as
shown.
Test the fit of the the fan 32-05 at the centre of the
aft end of the superstructure assembly. Apply a little
superglue to the two pins on the back of the fan and
fix in place.
Take the frame 32-06 and carefully cut away the
two hatches I1. Identify the two recesses on the
decking 29-04 and fix the hatches in place with a
little superglue.
02. DETAILS FOR THE WALLS AND DECKS OF THE FORWARD
SUPERSTRUCTURE
32-02
PM
32-03
32-05
29-04
I1
25-01
32-01
32-02
PM
32-04
01 02
40
40
AGORAMODELS BISMARCK
PB
AGORAMODELS BISMARCK
To Next Page
Loading...