1.Brightness: increase/decrease the brightness with button
2.Backlight timer: set the time at 10(seconds)/20(seconds)/
30 (seconds)/Always on. The default time is 30 seconds.
3.Screensaver: choose from No/Digital clock. Tap button
a. How to re-choose the language?
Find this icon in the main interface, and tap button
to access to its menu, scroll down to the last menu(the
menu at the buttom is "Default settings" in English). tap
button to enter and choose the first(upper) option
which means "Yes" , tap button again to confirm and
restore to factory settings, the player will power on
automatically and then you can choose language again.
b. Can’t turn on the player; The screen of player goes
blank/black; the player is crashed or has a firmware bug
1)Power off the player and try again.
2)Turn off the player, then press the reset hole with a clip to
3)Update the firmware. Please visit
http://www.agptek.com/support/download.html/ or
www.agptek.com/blog to download the firmware and
If the screen says "Disk error", please format the player.
Find it in "settings">"Format device".
Note: Please do not insert or take out the card before
turning off the player, or it may lead to Disk error or
To Next Page
Loading...
