AGPtek A25 - BT TX Submenu and Management; Bluetooth Receiver Mode (BT RX); Connecting to Smartphones

8
speaker has opened its Bluetooth function before
connection.

When connection failed, please go to
Home menu>Settings>Bluetooth settings>Clear the
pairings>Clearing the tx pairings to clear the paired
device first.
 Submenu. When already connected to Bluetooth device
and enter BT TX from home menu, it will show submenu
list, including:
◢ BT off. Close Bluetooth transmission signal.
◢ Disconnect. Choose to disconnect from the connected
device, but the Bluetooth transmission signal will still be
on.
◢ Re-search. Choose to re-search the available device.
◢ Device list. View the currently connected device.
Connect the player to Bluetooth smartphones.
Find “BT RX” on home menu and press the button to
enter.
 Enable. When enter the BT RX function, the screen will
prompt “Switching mode, please wait…”, then it will
show ‘Receiving signal, press back button to cancel’,
which means the player is ready to be connected to
smartphone.
 Connect. Turn on Bluetooth switch on your phone, and
choose to connect with the searched device “AGP-A25”.
When successfully connected, the player screen will show
“connection succeeded” with related icon will appear
on the right top of the screen.
NOTE: When connection failed, please go to Home
menu > Settings > Bluetooth settings > Clear the
pairings > Clearing the rx pairings to clear the paired
device first.
 Play. When connected to smartphone, the player is ready
BT RX (Bluetooth Receiver Mode)