Charge the Player
1. Plug the attached USB cable into the USB port of a computer to
charge the player.
2. Use only the 5V/500mAh charger for charging or it may lead to
product failure.
While it is fully charged, disconnect the cable from your device by
pulling it straight outward.
When you start charging, it will show two options: “Charge &
Transfer” and “Charge & Play”. An icon in the top right corner will
show the charging status.
Power On/Off
1. Power On: Slide the power switch to “On” position. If the switch
already at “On” position, just press the play button “ ” for 3
seconds.
2. Power Off:
To Next Page
Loading...
