AGRI-COVER Tonnosport User Manual

Thank you for purchasing TONNOSPORT
®
Roll-Up Cover. Agri-Cover, Inc. proudly
manufactured this cover using superior quality materials and workmanship. With proper
care, your cover will provide years of service and enjoyment.
NOTICE TO INSTALLER: Even if familiar with cover, read instructions prior to
installation as improvements may be made without notice. Always handle cover and
components with care. If you have questions or problems, have serial number ready and
call customer service. When done, these instructions must be given to the consumer.
NOTICE TO CONSUMER: Before using cover, read operating, maintenance and safety
sections. Save these instructions for future reference.
Questions? 866-630-8726
agricover.com
FOR YOUR RECORDS
DATE PURCHASED:
WHERE PURCHASED:
SERIAL NUMBER:
(Located on decal under rear bar by tailgate)
INSTALLATION INSTRUCTIONS

AGRI-COVER Tonnosport Specifications

General

Brand	AGRI-COVER
Model	Tonnosport
Category	Automobile Accessories
Language	English

Summary

Installation Instructions

Preparation and Parts Diagram

Installing Side Rails

Connecting Side Rails

Connect the front and rear side rail sections using provided hardware and alignment.

Positioning and Securing First Side Rail

Position, flush, and clamp the first side rail, ensuring it is level for proper fit.

Securing Second Side Rail and Final Torque

Install and torque the second side rail and all clamps to specified values.

Installing Tension Adjusters

Align and Attach EZ-DIAL Tension Adjusters

Align the tension adjusters on the front bar and loosely attach bolts for adjustment.

Mounting Cover to Side Rails

Mounting Front Bar to Side Rails

Set the cover on side rails, roll the front bar, and attach tension adjusters loosely.

Centering Front Bar and Final Tightening

Center the front bar and tighten tension adjuster bolts, ensuring vinyl flap is tucked.

Initial Operation and Adjustments

Placing Rear Bar and Verifying Fit

Place the rear bar into strikes, check tailgate fit, and verify clamp torque.

Checking Cover Tension and Adjusting

Check cover tension, ensure it snaps when closing, and adjust tensioners if needed.

Troubleshooting

Closing Roll Up Cover

Opening Roll Up Cover

Tips for a Longer Lasting Cover

Inspection and Maintenance

Safety Information

Manufacturer's Limited Warranty