AGRI EASE BE-FM RDG Series User Manual (English)

Questions and Answers:

A
Andrea GutierrezAug 19, 2025
How to fix streaking when using my AGRI EASE BE-FM RDG?
- G
  grahamjessicaAug 19, 2025
  Streaking during mowing with your AGRI EASE Lawn Mower can occur due to several reasons. It might be caused by slow blade tip speed, so ensure you operate the PTO at 540 RPM. Other potential causes include worn or dull blades, which require replacement or sharpening. If the blades can't cut the grass pressed down by the tractor's tire path, reduce the tractor's ground speed while maintaining the PTO speed. Mowing too fast or wet conditions can also lead to streaking, so slow down and allow the grass to dry, respectively. Also, a loose or glazed drive belt needs tightening or replacement, and a loose blade on the spindle should be tightened securely.
A
Allen NguyenAug 21, 2025
What to do if the belt is slipping on my AGRI EASE BE-FM RDG?
- J
  James HarrisAug 21, 2025
  If the belt is slipping on your AGRI EASE Lawn Mower, it could be due to several factors. The belt may be loose, glazed, or have oil on it, requiring tightening, application of belt dressing, cleaning, or replacement. The mower might be overloading because the grass is too tall or heavy; in this case, slow the tractor's ground speed while maintaining 540 RPM PTO speed, cut the grass twice, raise the mower for the first pass, and lower it for the second pass, cutting at a 90-degree angle to the first. Also, check the belt for free travel in the sheaves and remove any debris or foreign material under the mower deck and spindles.
C
Catherine JonesAug 23, 2025
Why does grass discharge unevenly from my AGRI EASE BE-FM RDG?
- M
  Mary RasmussenAug 23, 2025
  Uneven grass discharge or bunching from your AGRI EASE Lawn Mower can happen if the grass is too high, coarse, or wet. To resolve this, slow the tractor's ground speed while maintaining 540 RPM PTO speed. For high or coarse grass, raise the mower for the first pass, lower it to the desired height for the second pass, and cut at 90 degrees to the first pass. Ensure the rear of the mower is high enough for grass discharge without causing streaking. If the grass is wet, allow it to dry before mowing and consider cutting at a lower height. Also, make sure that the belt is tightened or replaced.
J
julia76Aug 26, 2025
What causes heavy vibration in my AGRI EASE BE-FM RDG Lawn Mower?
- B
  Beth GeorgeAug 26, 2025
  Heavy vibration in your AGRI EASE Lawn Mower can be caused by several issues. The blade speed might be too fast, so do not exceed 540 RPM PTO speed. A broken, bent, worn, or unbalanced blade can also cause vibration, requiring replacement or grinding. Additionally, check for a bent or broken sheave, which should be replaced, or debris caught on the blade, which should be cleaned off.
A
Amanda HernandezAug 27, 2025
Why does my AGRI EASE BE-FM RDG Lawn Mower require excessive power?
- M
  Michael DukeAug 27, 2025
  Your AGRI EASE Lawn Mower requiring excessive power can stem from several factors. If you're advancing into the grass too rapidly, reduce your forward travel speed. Hitting the ground can also cause this issue, so raise the mower and reset the wheels. Other potential causes include worn or dull blades (sharpen or replace them), using a tractor that isn't large enough (use a larger horsepower tractor), wet grass (allow it to dry), or grass that's too tall and heavy (slow ground speed and make two passes, raising the mower for the first pass and lowering it for the second).
S
Sara NguyenAug 30, 2025
How to prevent blades from wearing too fast on my AGRI EASE Lawn Mower?
- N
  Nathan McdonaldAug 30, 2025
  If the blades on your AGRI EASE Lawn Mower are wearing too fast, it could be due to cutting in sandy or rocky conditions, or the blades hitting the ground. To mitigate this, increase the cutting height. If rocks are the issue, remove them from the area.
L
Luis GomezSep 1, 2025
Why is the gearbox overheating on my AGRI EASE Lawn Mower?
- L
  Linda DaltonSep 1, 2025
  If your AGRI EASE Lawn Mower's gearbox is overheating, it may be low on lubricant, using an improper type of lubricant, or have excessive trash build-up around it. Ensure the lubricant is filled to the proper level, replace it with the proper type if needed, and remove any trash from around the gearbox.
L
lwallerSep 3, 2025
What to do if the belt is damaged on my AGRI EASE BE-FM RDG?
- B
  Brianna Garrison DVMSep 3, 2025
  A damaged belt on your AGRI EASE Lawn Mower, whether from rollover, high shock loads, or installation damage, should be replaced with the correct specified belt.
S
Stephen BriggsSep 5, 2025
Why is the blade scraping the ground on my AGRI EASE BE-FM RDG?
- J
  Jeffrey WilliamsSep 5, 2025
  If the blade of your AGRI EASE Lawn Mower is scraping the ground, it could be because the mower is set too low, the field is ridged, or the field is too wet. Raise the mower and reset the wheels. If the field is ridged, try cutting at a different angle. If the field is too wet, wait until it dries before mowing.
J
Jeffrey BrockSep 7, 2025
What causes belt breakage on my AGRI EASE Lawn Mower?
- J
  Jeremiah HenrySep 7, 2025
  Belt breakage on your AGRI EASE Lawn Mower is often due to high shock loads. To prevent this, avoid hitting the ground and large obstructions with the mower. Also, check the sheave for proper alignment and foreign material, and ensure proper belt tension.