Need help?Do you have a question about the AGRI EASE BE-AGL125F and is the answer not in the manual?
General| Brand | AGRI EASE |
|---|---|
| Model | BE-AGL125F |
| Category | Lawn Mower |
| Language | English |
Explains safety graphic symbols used in the manual to highlight danger levels or important information.
Details safety labels and their importance, emphasizing reading and respecting warnings for injury prevention.
Advises maintaining a minimum safety distance of 70 meters from the machine during operation.
Defines intended use and lists forbidden operations to ensure safety and machine integrity.
Highlights the importance of complying with safety precautions to prevent accidents during operation or maintenance.
Outlines the physical, mental, and training qualifications necessary for operating the mower safely.
Specifies essential clothing and safety accessories to be worn during operation and maintenance activities.
Covers considerations for the work area and essential preparation steps before operating the mower.
Details critical rules for operation and maintenance, including safety labels, guards, and hazard avoidance.
Step-by-step guide for safely attaching the flail mower to the tractor using the three-point linkage.
Advises checking tractor front wheel grip and adding ballast if necessary after lifting the equipment.
Instructions for correctly attaching the PTO shaft, ensuring RPM and rotation match, and safety shield compliance.
Explains how the rear roller position determines working height and affects cutter proximity to the soil.
Details how to adjust drive belt tension, align pulleys, and ensure correct belt deflection for optimal performance.
Specifies recommended working speeds, road transport guidelines, and compliance with regulations.
Provides guidance on machine storage and essential checks before the start of the operating season.
Emphasizes cleaning zerks, using correct oil, stopping engine, and checking bolts/guards before/after work.
Details maintenance tasks required at different intervals: First Check, Every 8, 50, 500, and 1000 Hours of Work.
Explains the procedure for draining, cleaning, and refilling the gearbox oil based on operating hours or annually.
Outlines daily, 50-hour, and annual lubrication and checks for PTO shaft and related components.
Provides a step-by-step procedure for disassembling, cleaning, greasing, and reassembling the PTO shaft.
Diagram and part list for the main mower assembly, detailing components like nuts, bolts, and bearings.
Diagram and part list for the gearbox and PTO cover assembly, showing bolts, nuts, and covers.
To Next Page
