To Next Page
C
Christian MooreJul 30, 2025
Why do the wheels skid when using my Agri-Fab 45-03201?
- FfernandezkatherineJul 30, 2025
If the wheels on your Agri-Fab Lawn Sweeper are skidding, there could be a few reasons. First, the brushes might be set too low; adjust the height until the brushes are about 1/2" down into the grass. Another cause could be jammed brushes; if this is the case, stop the sweeper and remove any obstructions. Finally, the wheels themselves might be jammed. Remove one wheel at a time to check for obstructions or damage.
General
