Safety Notes
-7-
1.2 Safety warning signs
Notes:
1.The safety warning signs must be kept clear and legible; if they are dirty, wash them
with soap water, or clean them with soft rag;
2. If the safety warning signs are lost or unclear, contact the distribution department or
manufacturer in time for replacement;
3. If the parts with safety warning signs are to be replaced, then the safety warning
signs also shall be replaced when the parts are replaced;
4. The contents of safety warning signs involve personal safety, so they shall be well
implemented.
Meaning:
It is forbidden to sit at the non-passenger position of
the tractor, or falling accident may occur!
Application position:
Middle position of left and right fender boards.
Figure1-1 Safety warning signs
Meaning:
Certain distance shall be kept with the hot machine
surface during the machine operation, or scald
accident may be caused!
Application position: Outside of silencer.
Figure1-2 Safety warning signs
To Next Page
Loading...