Agrison HP ULTRA Series - Balance Weights, Seat Adjustment, and Covers

Operation Instruction
-23-
2.13 Using of Balance Weight
2.13.1 Rear balance weight
When the tractor is working in farm field, the quantity of the balance weight can be selected
according to different working patterns in order to improve the working performance of the tractor.
Each piece of cast iron balance weight weighs 50kg, and at most 3 pieces can be mounted at one
side (150kg).
Notice: Before dismounting the rear wheel which is provided with the rear
balance weight from the tractor, you shall firstly dismount the back balance weight from the
tyre, so as to prevent the risk of losing balance.
2.13.2 Front balance weight
In order to adjust the relation between the front balance weight and the back balance weight
of the tractor, it is necessary to mount the front balance weight block at the front part of the tractor.
For plough work under heavy load or hanging machines like large scale seeding machinery, in
order to guarantee the head o f the tractor does not raise and run safely, the front balance weight
with sufficient weight must be mounted.
The front ballast weight 130Kg.
At most 10 pieces of cast iron front balance weights can be selected and mounted on the
tractor [each piece weighs 40kg].
Notice: The rear parts of tractor match large agricultural machinery, to
assure the safety, we must match enough front balance weight, otherwise the
tractor will turn over.
2.14 Adjustment of the Driver’s Seat
The driver can adjust the seat according to his/her height.
2.14.1 The front and rear adjustment of the Driver’s Seat
Loosen the hexagon head bolts under driver’s seat, in according to the drivers’ height, then
adjusting the driver’s seat. After adjusted, fastening the hexagon head bolts.
2.14.2 The front and rear adjustment of the Driver’s Seat
In according to the driver’s height, weight adjusting cab’s flywheel.