Page 4 of 4 Ver 1.3 File No.:RTU501513
3. Standard Packing List
Control Unit X1, GSM ANT X1, User Manual X1(CD), Connector X1,AC/DC Adaptor X1.
Optional Accessories: (Wired Sensors)
PIR Motion Sensor, Glass Break Sensor, Magnetic Window Sensor, Temperature Sensor, Infrared Beam
Fence, Vibration sensor, Siren.
4. Physical Layout
4.1 Control Unit physical layout
Interface Instruction
Relay
Relay Status, calling in, the relay will work, this LED Indicator will on.
When the wired sensor triggered, the LED indicator will on, Otherwise, is off.
GSM
When insert the SIMcard into the Slot and power on, will flash 10S with red color, then
the Led will change to Red color(not flash) for 3minutes(In this 3 minutes, you can send
RESET to reset the RTU5015.) When registered GSM Network successful, will change
to Green color(not flash). When calling in, the relay works, will change to Red color.
Power
External 12VDC Power LED indicator
O1 +
Output 1+, the relay rating is 3A/240VAC; connect to the switch of the lock or devices.
To Next Page
Loading...
Need help?
General