https://www.agrotkindustrial.com/
sales@agrotkindustrial.com
Technical parameters
Tilt Function
The Articulating Cutter deck can tilt up 90° from the horizontal position and tilt down 35° from
the horizontal position. Use the UP and DOWN buttons on your skid steer’s auxiliary electric
controller, or paddle controller to tilt the cutter head. The tilt function is used for cutting on
sloped terrain surfaces.
With the boom swung at 90°, you must be aware of any
obstacles and terrain in front of the cutter head and in front of
your skid steer. Lack of awareness may cause the skid steer
loader or Articulating cutter to strike obstacles that may result in
serious injury or damage to equipment.
To Next Page
Loading...
