NOTE
In the starting phase it is suggested to select FLIGHT mode as
soon as possible in order to speed up the engine oil heating.
ENGINE 2 START
Repeat above procedure to start engine N°2.
CAUTION
Ensure that the second engine engages as the N2 reaches FLIGHT
condition. A nonengaged engine shows positive N2 value and
near zero torque. If a nonengagement occurs, shut down the
nonengaged engine first. When the nonengaged engine has
stopped, shut down the engaged engine. If a sudden (hard)
engagement occurs, shut down both engines. Maintenance action
is required.
RFM A109E
2-24 R.A.I. Approved
Rev. 21
To Next Page
Loading...