CPA-360
PA CASSETTE PLAYER
OPERATION MANUAL
OPERATION MANUAL
28W RMS / 35W Max.
Please read this manual thoroughly before making connections and turning on the power. Following the instructions in
this manual will enable you to obtain optimum performance from your new AHUJA PA Cassette Player.
Please retain this manual for future reference.
®
SPECIFICATIONS
GENERAL
PLAYER SECTION
Power Supply : AC: 22 0 -240V 50 / 60Hz*
Track System : 2 Track Monaural
: DC: 1 2 -14 V Car Battery
Tape Speed : 4.75 cm / sec.
Power Consumption : AC: 48 VA at rated output
FF Time : 190 sec. approx. (C-60)
: DC: 2.7 A / 12V
Wow & Flutter : 0.35% Nominal
Semiconductors : 13 Transistors
Tape Speed Accuracy : Within +2% -1%
: 13 Diodes
: 2 Zener Diodes
AMPLIFIER SECTION
: 2 LEDs
Power Output : 35 Watts RMS (max.)
Dimensions : L280 × H100 × D295 mm
: 28 Watts RMS at 10% THD
Weight : 5.0kg approx.
Input Channels : 2 × Mic 0.5mV (Lo-Z) / 2.5k
: 1 × Aux 50mV / 250k
Frequency Response : 100Hz - 12,000Hz ±3dB
S / N Ratio : >55dB
Tone Control: : Bass: -6dB at 100Hz
: Treble: -10dB at 10kHz
* This unit is connected to 240V tap when leaving the factory.
Output Taps for speaker : 4, 8, 16 & 100V
Matching
Specifications claimed are subject to permissible production
Line Output : 250mV / 3.5 k
tolerances.
FEATURES
Imported Tape Deck Mechanism with Auto Stop used.
Provision for automatic changeover from AC to Battery Operation ensuring continuity of program.
100V line for long distance speaker connections.
Separate BASS and TREBLE controls for shaping tonal quality of music & speech as desired.
LINE OUT for connecting additional booster amplifier.
Two low impedance Microphone inputs and one Aux. Input. The Aux input is for connecting Mixer, CD Player,
etc.
n
n
n
n
n
n
2
4
6
8
0
10
MIC-1
2
4
6
8
0
10
MIC-2/AUX
PLAY
LOW IMPEDANCE MIC INPUTS
MON
POWER
PWR
FF
EJECT
2
4
6
8
0
10
BASS
2
4
6
8
0
10
TREBLE
CPA-360
AC/12V DC
2
4
6
8
0
10
TAPE
TAPE
LO
HI
AUTO STOP CASSETTE
To Next Page
Need help?
General
