2. Monitoring
The Ei3000MRF SmartLINK Module has the ability to “Monitor” the RF signal path
and strength. This is an enhanced self-monitoring function that recognises system
tampering or alarm head removal. In monitoring mode each Alarm will check the
presence of its strongest received RF signal. If the signal is missing then the Alarm
will record a monitoring failure event. It will also signal the failure via a change in
the indicator light pattern.
For more information on using this feature, please visit www.eielectronics.com and
refer to the relevant section on the SmartLINK Monitoring feature.
3. Data Extraction
The Ei3000MRF SmartLINK Module is equipped with a feature that allows for the
extraction of information from an Ei Electronics Compatible Alarm, using an Ei
Electronics download device. Once the system has been set up, information can be
accessed securely from within or outside a property if access is an issue The event
log can contain very useful information about any recorded events in the history of
the Alarm such as: Fire Events, Alarm Head removals, Button Tests, and so on.
Event logs can be retrieved as many times as necessary.
For more information on using this feature, please visit www.eielectronics.com and
refer to the relevant section on the SmartLINK Data Extraction feature.
11
To Next Page
Loading...