5 / 28
01 Overview
Thank you very much for choosing the products of AIKO Energy Technology Co., Ltd. (hereinafter referred to as “AIKO”). This
Installation Manual contains important information regarding electrical and mechanical installation which you shall know
before installing modules. It also contains some other safety information that you must be familiar with.
This Installation Manual is not intended as any warranty, expressed or implied. Nor does it include any indemnification plan
against loss, module damage or other expenses directly arising out of or in connection with the installation, operation, use
or maintenance of modules. AlKO reserves the right to make revisions to the product specification and this Installation Manual
without prior notice.
Customer's failure to install modules according to the requirements listed in this Installation Manual will invalidate the limited
product warranty offered to customer. Recommendations in this Manual are provided to improve installation safety, and are
based on tests and practical experience. Please provide this Manual to end customers (or consumers) and inform them of all
safety, operation and maintenance requirements and recommendations.
02 Laws and acts
Mechanical and electrical installations of PV modules shall be executed by referring to the applicable laws and acts, including
the electrical act, building act and electrical connection requirements. These requirements vary from one location to another,
such as building rooftop installations and onboard applications. They may also vary with mounting system voltage and current
property (DC or AC). Please contact your local authority for further details.
To Next Page
Loading...
