9 / 28
3.3 General safety
AlKO modules are designed to operate in application according to IEC standards IEC-61215 and IEC-
61730. Modules are designed with safety class ll and fire class rating C.
⚫ Before to handle and install AIKO PV module, read carefully and understand this
Installation Manual. If you need any explanation, contact AIKO (aikosolar.com).
⚫ Always use appropriate protections such as insulated tools, safety helmets,
insulating gloves, safety belts and safety insulating shoes when handling the module whether it is or not
connected to the system. Please use the appropriate electrical safety tools when you need to install, ground,
connect,
clean or handle the module.
⚫ PV modules generate DC electrical energy when exposed to sunlight or other light source. Improper contact
with live parts of the module (e.g. connectors) can result in burns, sparks, and lethal shock
⚫ Observed local laws and regulations for module installation and obtain a building license or other
qualifications where necessary.
⚫ Modules shall be installed by qualified persons who have specialized skills and knowledge and are familiar
with the mechanical and electrical requirements of the system. Potentially harmful risks during installation,
including electrical shock, shall be identified in advance.
⚫
Roofto
p systems can only be installed on the roofs which have passed the evaluation of construction experts
with formal, full structural analysis results,
where necessary
.
⚫ Observed the safety regulations for all mounting components. For example,
wires and cables, connectors, inverters and batteries.
⚫ Artificially concentrated sunlight shall not be directed onto the module
3.4 Electrical safety
Please strictly follow the electrical safety precautions below to avoid any form of electrical safety accident.
⚫ Modules can generate DC voltage>30V under standard temperature condition (STC), take care to
avoid direct contact. When installing modules, wear protective helmets, insulating gloves, and rubber
shoes. Do not install components without security precautions.
⚫ Do not drill holes in the frame, this action may cause module insulation failure
To Next Page
Loading...
