Aim SmartyCam 3 Series

Need help?

Do you have a question about the Aim SmartyCam 3 Series and is the answer not in the manual?

Summary

SmartyCam 3 Topics

Wide Global Shutter CMOS Sensor

The best way to avoid wave effects when vibrations are strong.

Full HD Image

Completely Waterproof

Sapphire Frontal Glass

SmartyCam 3 Connections

SmartyCam 3 Buttons, ON;OFF, Powering and LEDs

4.1 - Pushbuttons

SmartyCam 3 Sport features two metal pushbuttons on its back, each managing two different features.

4.2 - Power ON;OFF

SmartyCam 3 needs external power and can turn ON manually or automatically after inactivity.

4.3 - LEDs Working Mode

(Micro) SD Card Management

SmartyCam 3 Start;Stop Recording

SmartyCam 3 Menu

7.2 - Tracks

7.2.1 - Loading Tracks to SmartyCam 3

Details the procedure for loading track maps to SmartyCam 3 via SD, Ethernet, or USB-C.

7.2.2 - Managing Tracks on SmartyCam 3

7.4 - Update

Allows updating SmartyCam 3 firmware, configurations, and tracks.

7.4.1 - Firmup

Procedure for updating SmartyCam 3 firmware via SD, Ethernet, or USB-C.

7.4.2 - Tracks Update

Explains how tracks can be updated, referring to the firmware update procedure.

SmartyCam 3 and the PC

8.1 - Creating SmartyCam 3 Configuration

Step-by-step guide to create a new SmartyCam 3 configuration using Race Studio 3 software.

8.1.1 - Configuring SmartyCam 3 Overlay

Details how to configure video overlays, including graphical data, track maps, logos, and secondary cameras.

8.1.2 - Logos & MAP and Second Camera Setting

8.1.3 - Configuring SmartyCam 3 Parameters

Guides on setting recording parameters for Stand-Alone or Master-connected modes.

8.1.4 - Configuring CAN Protocol

Explains how to configure CAN protocol for data transmission between AiM logger and SmartyCam 3.

8.1.5 - ECU Stream

Loading Configuration to SmartyCam 3

Track Management

Video Management