Need help?Do you have a question about the Aim SmartyCam 3 Sport and is the answer not in the manual?
CMOS sensor technology to prevent wave effects during strong vibrations.
High-definition video recording at 1920x1080 resolution.
Designed for harsh environments including water, dust, and temperature extremes.
Strong glass resistant to impacts from pebbles, insects, and dust.
Customize data display layouts for preferred control.
Utilize a second camera feed, adjustable in Race Studio 3.
Auto start/stop recording based on conditions or logger input.
Automatic track selection and synchronized video/data recording.
Connect the SmartyCam 3 to external 12V battery and ECU.
Connect SmartyCam 3 to a GPS Module using specific cables.
Connect SmartyCam 3 to AiM Dashes/Loggers via AiM CAN network.
Details on short and long press functions of the pushbuttons.
How to turn the SmartyCam 3 on and off manually or automatically.
Understand the meaning of PWR/CHG, DATA, and STATUS LEDs.
Procedures for inserting, formatting, and using SD cards for storage and configuration.
How to start and stop recording manually or automatically.
View the status of the connected GPS and satellite signal.
Displaying track maps and vehicle position on the circuit.
Procedures for loading track maps via SD card or Ethernet/USB-C.
Automatic or manual track selection and preview.
Configure auto start/stop, power off, logs, system time, and more.
Adjusting the reference area for light and exposure settings.
Adjusting internal and external microphone gain.
Configure video output for streaming (SmartyCam 3 Dual only).
Manage recording count and enable/disable video overlays.
Erase stored track data from the device.
Flipping video image for inverted camera mounting.
Resetting the SmartyCam 3 to its default factory settings.
View system, connection, hardware, and restore information.
Updating firmware, configuration, and tracks.
Step-by-step guide to update the device firmware via SD or USB/Ethernet.
View the list of recorded video files stored on the SD card.
Steps to create a new device configuration using Race Studio 3.
Customize video overlays, including graphical data and logos.
Incorporate track maps, logos, and PiP for video enhancement.
Set standalone recording conditions for SmartyCam 3 Sport.
Integrate SmartyCam 3 with AiM loggers via CAN bus.
Set up ECU data stream for SmartyCam 3 Dual using specific protocols.
Transferring configurations via SD card or Ethernet/USB-C.
Create, modify, and load tracks using the Track Manager.
Review and download video files from the camera to the PC.
Detailed specifications for the SmartyCam 3 Sport model.
Detailed specifications for the SmartyCam 3 Dual model.
Physical dimensions of the SmartyCam 3 Sport in mm and inches.
Connector pin assignments for the SmartyCam 3 Sport.
Physical dimensions of the SmartyCam 3 Dual main unit and cameras.
Connector pin assignments for the SmartyCam 3 Dual's Deutsch connector.
Wiring diagrams for SmartyCam 3 Dual standard and Ethernet harnesses.
Wiring diagram for the SmartyCam 3 Dual full harness.
General| Brand | Aim |
|---|---|
| Model | SmartyCam 3 Sport |
| Category | Action Cameras |
| Language | English |
To Next Page
