Aimetis Symphony - Task 1: Configure AXIS controller; Task 2: Create AXISPACSListener Service

Task1:ConfigureAXIScontroller
AimetisSymphony™AXISAccessControlIntegr ationGuide 2
©2015AimetisCorp.(3‐2015)Rev .01
Task1:ConfigureAXIScontroller
Theinformationbelowissubjecttochange.Forthemostup‐to‐dateinformation,seetheAXISEntryManagerdocumentation.
1. Logontothe devicethroughthewebinterface.
2. IntheAXISEntryManager :
a. Deactivatestand‐alone mode.
b. Addusersanddoors.
c. Addschedules.
d. Configureallnaming(noteifnamingchangedoncontrollerafterconnectedtoSymphony,youmustreconnect
toSymphony).
Task2:CreateAXISPACSListenerWindows
Serv ice inSymphonyServer
1. FromWindows®commandprompt,enterthefollowing:
sc create "AI AXISPACSListener" binPath= "c:\program files (x86)\aimetis\symphony\_bin\AXISPACSListener.exe"
2. RestartServerServicestoruntheAXISPACSListenerservice.
Stand‐alonemodeisforonecontrolleronly,it’sactivatebydefault.Mul tipleco ntrollerscanwork separately
instand‐alonemodeaswell.Butinordertolinkthemtogether,stand‐alonemodemustbedeactivated.