Aimpoint Acro C-2 - Operation; Install or Replace Battery

2 OPERATION
WARNING: Ensure the weapon is not loaded and the
safety selector is in the ”safe” position before attempting
to install, remove or perform maintenance.
2.1 Install or replace battery
a Unscrew and remove the battery cap (3) using the at
side of the Aimpoint tool (8B) .
b If replacing battery, remove depleted battery from the
battery compartment by carefully pressing down on an
edge as shown in Fig 2.
CAUTION: Take care not to damage the battery
compartment. Do not use sharp tools (e.g. a knife) to
remove the battery.
1 2
Fig. 2 Remove battery