E-01: Set Aux Relay 2 Mode
E-02: Aux RY2 ON Condition
E-03: Aux RY2 OFF Condition
E-04: Aux RY2 MIN. ON time
※ The functions and the settings of Auxiliary Relay 2 are exactly the same as those of Auxiliary Relay
1 so please refer to above Group D, Auxiliary Relay 1 description.
Group F
Parallel Setup
F-01: Parallel MODE
Use Constant F-01 to set up AIMS MPPT+ Network. Each AIMS MPPT+ in parallel requires a
mode and address entry.
The Mode choices are:
To Next Page
Loading...
