Ainuo AN9640BV3(F) - User Manual

1
Name of Product
Electrical Safety Comprehensive Test System
Models covered in this manual:
AN9640B V3（F）: Six- in-One (GB+IR+ACW +LC+PA+ST+DCW);
Meaning of abbreviations:
ACW
:
AC Withstand Voltage Test
IR
:
Insulation Resistance Test
GB
:
Ground Resistance Test
LC
:
Touch Current/Leakage Current Test
PA
:
Power Test
ST
:
Low-voltage Start-up Test
DCW
:
DC Withstand Voltage Test

Summary

Chapter 1 Safety Rules

1.1 General

General safety precautions for operating the analyzer.

1.2 Warning Signs

Explains various warning symbols and their meanings.

1.3 Testing Station

Guidelines for setting up a safe testing environment.

1.4 Operating Regulation

Rules and qualifications for operating the analyzer safely.

1.5 Operating Rules

Specific operational rules and precautions for safe testing.

Chapter 2 Overview

2.1 Introduction

Introduces the AN9640BV3(F) comprehensive safety performance analyzer.

2.2 Features

2.5 Installation and Connection

Steps for installing and connecting the test system.

Chapter 3 Unpack and Installation

3.1 Installation Environment

Guidelines for selecting an appropriate installation location.

3.2 Unpack and Check

3.3 Check before power-on

Pre-operation checks to ensure proper functioning.

3.4 ESRS Software Operation

Instructions for installing and operating the ESRS software.

Chapter 4 Settings and Test

4.1 Wiring Connection

Step-by-step guide for connecting test wires and DUT.

4.2 Power On

4.3 System Settings

4.5 Parameters Settings

Detailed settings for various test parameters (GB, IR, ACW, etc.).

4.6 Start to Test

Process for initiating and conducting tests.

4.8 Calibration

4.9 Shutdown

Chapter 6 Maintenance

6.1 Maintenance and Care

Guidelines for regular and daily maintenance.

6.2 Troubleshooting

Common faults and their solutions.

6.3 Storage and Transport

Annex B Safety Knowledge

B.1 Importance of safety test

B.2 GB

B.3 IR

B.4 ACW;DCW

B.7 LC

B.8 PA and ST

Ainuo AN9640BV3(F) Specifications

General

Brand	Ainuo
Model	AN9640BV3(F)
Category	Test Equipment
Language	English