To Next PageTo Next Page
Need help?Do you have a question about the Ainuo AN9640B and is the answer not in the manual?
General operating instructions and precautions for using the analyzer safely.
Explanation of various warning symbols and their meanings on the instrument.
Guidelines for station setup, operator qualifications, clothing, and medical restrictions.
Critical rules and precautions to follow during operation to prevent injury or death.
Overview of the AN9640BV3(F) Comprehensive Safety Performance Analyzer and its features.
Description of the front panel controls and rear panel interfaces.
Step-by-step guide for installing and connecting the test system and its components.
Details of various accessories included with the test system like test box, GB clamp, and cables.
Factors to consider when selecting a suitable installation location for the instrument.
Procedures for unpacking, checking items, and performing pre-power-on checks.
Detailed instructions on how to operate the ESRS system software, including startup and management.
Steps for connecting the necessary wires and cables for the test system.
Instructions for powering on the system and selecting the desired function from the main menu.
How to configure system parameters like volume, password, language, theme, and communication.
How to select groups and set specific test parameters for GB, IR, ACW, DCW, LC, PA, ST, and WAIT.
Procedures to initiate testing, display results, handle pass/fail/error states, and compensation.
How to enable and use extended functions like USB flash disk and PLC.
Steps for safely shutting down the analyzer and removing the DUT.
Describes ALARM output and REMOTE input signals, including pin definitions.
Explains PLC, Barcode Input, COM, U Disk, and EXT-COM ports for communication and control.
Explains the SIGNAL INPUT/OUTPUT terminals and their function for group selection.
Guidelines for regular and daily maintenance, cleaning, and general care of the analyzer.
Information on identifying and resolving common faults, communication issues, and disk identification problems.
Instructions for proper storage conditions and safe transportation of the instrument.
Detailed technical specifications of the test system, including installation, environment, and power.
Performance characteristics and accuracy for various test types (ACW, DCW, IR, GB, LC, PA, ST).
Lists the available attachments and accessories for the test system.
Presents a block diagram and explains the core principles and operation of the safety performance analyzer.
Discusses the importance of safety testing for electrical equipment in product assurance.
Explains Ground Resistance, Insulation Resistance, AC/DC Withstand Voltage, Leakage Current, PA/ST tests and their principles.
Defines key electrical discharge phenomena like arc, flashover, breakdown, and corona.
Describes handshake protocol, communication ports, and protocol format for analyzer-PC interaction.
Details command lists, error returns, operating procedures, and detailed parameter settings for various tests.
Lists the key components of the product, their specifications, and manufacturers.
General| Brand | Ainuo |
|---|---|
| Model | AN9640B |
| Category | Test Equipment |
| Language | English |
