Pre-Ride Safety Checklist
Aipas eBikes recommends going through each item on the pre -
ride safety checklist before and after ea ch ride. Spending time
to make sure all of the bike’s components are in good working
order before a ride is a crucial step along the way to a safe
and fun ride.
This checklist is not intended to function as a detailed service
manual. Be sure to read your entire owner’s manual before riding
or repairing your bike. If you do not have the expertise required to
perform any of these checks, Aipas eBikes recommends having
your local bike shop mechanic perform a detailed safety check
of your bike in regular intervals. Ensure your local mechanic is
experienced and reputable.
口
B
efore each ride, inspect your eBike for
damage. If damage is found, do not ride.
□
Verify that the front and rear axles are secure.
口 Check that the front and rear tire pressure is
within the recommended pressure ra nge
printed on the tire sidewall.
口 Pull the brake levers to ensure the brakes are
working properly and adjust if necessary.
口 Visually inspect the bike for damage or anything
out of the ordinary.
口 Turn on the lights, especially if riding at night.
口 Make sure all hardware is tightened to the
recommended torque specifications found in
“Tightening Torque” on
page 27 of the owner’s manual.
口 Verify that the stem folding latch is securely closed
and locked.
口
Making sure adjustable stem is closed and
locked and that all hardware is tightened to torque
spec found in “Tightening Torque” on page 27.
To Next Page
Loading...