MAINTENANCE
You should have your bicycle maintained at regular service
intervals at your local bicycle shop.
To prevent serious injury or death:
• NEVER open any of the components, including the battery,
display, motor, or PAS sensor. Service should only be
performed by a bicycle repair shop.
• Always remove the battery pack before performing any
bicycle inspection, maintenance, or repair.
• If you suspect that something is loose, do not ride your
bicycle.
All nuts, bolts, and screws require the proper tightening
force. Too little force and the fastener may not hold
securely. Too much force and the fastener can strip
threads, stretch, deform, or break. Either way, incorre ct
tightening force can result in component failure, which
can cause you to lose control and crash. Take your
bicycle to a bicycle repair shop for service.
• Do not paint any components of your Aipas eBike as they
may cause premature failure of the component.
• Do not submerge your Aipas eBike or its components in
water or use a pressure washer to clean.
Caring for Your eBike
Always observe the operating and storage temperatures of your
Aipas eBike and its components. Protect m otor, display, and
battery pack against extreme temperatures (e.g. from intense
sunlight without adequate ventilation). Extreme temperatures
can damage components (especially the battery pack).
Please have your Aipas eBike serviced at least once a year.
WARNING!
To Next Page
Loading...