FEATURES
WARNING!
Never modify your frame or bicycle in any way as this could
cause serious injury or death. Do not sand, drill, file, or remove
parts from your bicycle. Do not install incompatible components
or hardware.
Motor
To prevent serious injury or death:
• Do not open the drive unit yourself. The drive unit must only be
repaired by qualified personnel using only original parts. This
will ensure that the safety of the drive unit is maintained.
Unauthorized opening of the drive unit will render warranty
claims null and void.
• All components fitted to the drive unit and all other
components of your Aipas eBike PAS system (e.g.
chainring, chainring
receptacle, pedals) must only be
replaced with identical
components or components that
have been specifically approved by Aipas eBikes. This
should help protect the motor from
overloading.
• Always remove the battery pack from your Aipas eBike
before beginning work (e.g. inspection, repair, assembly,
maintenance, work on the chain, etc.), transporting it with
a car or on an airplane, or storing it. Battery pack removal
should prevent unintentional activation of your Aipas eBike.
• Do not make any modifications to your Aipas eBike or attach
any other products that might increase the performance of
your Aipas eBike. Doing so will generally reduce the service
life of the system and risks damaging the drive unit and the
bicycle. You also run the risk of losing the guarantee and
warranty claims on the bicycle you have purchased. By
handling the system improperly you are also endangering
your safety and that of other road users,
WARNING!
To Next Page
Loading...