EasyManua.ls Logo

AIPAS A6 - Hydraulic Disc Brake Usage; Front and Rear Light Control

Default Icon
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hydraulic Disc Brakes
Your Aipas A6 is equipped with hydraulic disc brakes.
To prevent serious injury or death:
ALWAYS apply right brake lever (rear wheel) before and
during use of the front brake.
ALWAYS apply even pressure to both brake levers when
slowing down or stopping.
If only the front brake is applied while slowing or stopping
quickly, you may be ejected over the front handlebars.
Before riding, check to ensure brake levers do not touch the
handlebars when fully applied. If either lever touches the
handlebars, screw or unscrew the barrel adjuster to increase
tension in the brake cable. If this does not fix the problem, take
your bicycle to an experienced bicycle mechanic for further
adjustment.
To brake the rear wheel:
Pull right brake lever to activate rear brake.
To brake the front wheel:
Pull left brake lever to activate front brake.
Dis
c brake rotors will become hot during use and will stay
hot for a short period after use. To prevent burns, do not
touch the disc rotor right after use.
Front and Rear Lights
Your Aipas eBike comes with integrated front and rear lights.
To turn lights ON: Hold plus (+) button on the display control
pad for about 3 seconds until the lights turn ON.
To turn lights OFF: Hold plus (+) button on the display control
pad for about 3 seconds until the lights turn OFF.
Always turn lights ON for your safety, especially when
riding at night or in low visibility situations.
WARNING!
WWW.AIPASBIKE.COM
29