Settings Menu
Do not tamper with your bicycle. Tampering is defined as
removing or replacing any original equipment, or modifying
your bicycle in any way that may change its design and/or
operation. Such changes may seriously impair the handling,
stability, and other aspects of the bicycle, making it unsafe to
ride. Tampering can void the warranty
and render your bicycle
non compliant with the applicable lawsand regulations. Aipas
eBikes is not responsible for any direct,
incidental, or
consequential damages, including, without limitation,
damages for personal injury, property damage, or economic
losses due to tampering.
To change display settings, hold the plus (+) and the minus (-)
buttons simultaneously to enter into the Settings Menu. Press
the button to toggle between each numbered setting. To
adjust the value of each setting, click the plus (+) and the
minus (-) buttons as needed.
There are 22 settings (P01-P22). You should only change the
settings listed below.
To prevent serious injury or death, DO NOT change settings
excluded from the table. Changing settings not listed in the
following table
may cause your bike to stop working properly. If
you need the
default value of a setting not listed, contact Aipas
eBikes. DO NOT ride your bicycle until the default settings have
been restored.
WARNING!
WARNING!
To Next Page
Loading...