system malfunction, or electrical fire and consequent property
damage, injury, or death. Follow all recommendations to
minimize chance of water damage. If you have any
questions, contact Aipas eBikes.
• Keep battery charger clean. Contamination can lead to the
risk of an electric shock. Clean only with the use of a damp
cloth (mild soap/water) when the charger is unplugged
from both the wall
and the bike.
• Keep the rubber plug inserted into the battery any time the
battery is in the bike to prevent water ingress.
To reduce the risk of fire, connect only to a circuit provided with
10 amperes maximum branch circuit over current protection in
accordance with the National Electrical Code, ANSI/NFPA 70.
Never use extension cords with your Aipas eBikes charger
provided with the purchase of your ebike, after sales service,
or warranty charging devices.
Using a damaged battery or charger can create additional bike
damage or a fire hazard. Stop using your battery and charger and
contact Aipas eBikes immediately if any of the following occur:
(1) Your charger’s flexible power cord or output cable or any
of the electrical cables on your bike is frayed, has broken
insulation, or any other signs of damage, (2) Your battery or
charger is physically damaged, non-functional, or performing
abnormally, (3) Your battery or charger experienced a
significant impact from a fall or crash, with or without
obvious signs of damage, or (4) Your charger becomes
too hot to touch (it’s designed to get warm with normal use), gives
off an odor, or shows other signs of overheating. Store any
damaged battery or charger in a safe location and, as soon as
possible,recycle or otherwise dispose of it according to local
rules. Contact Aipas eBikes if you have any questions or to
purchase a compatible replacement battery or charger.
CAUTION
WARNING!
To Next Page
Loading...