4
Above warning and cautions are not intended to incorporate all possible
instances for risks and/or severe injury. Pool/spa owners should always
exercise intensive caution and common sense when operating the cleaner.
(1) Before connection to the cleaner, firstly connecting the charger with socket
to check the charger quality, when the light is green, the charger is ok;Then,
connecting to the cleaner, if the light is red, it means the cleaner is charging.
(2) Around 3 hours later, the light turns to green, it means the machine is full
of power now.
2. How to use ?
2.1 How to connect with charger ?
2.2 How to assemble the cleaner ?
2.2.1 Component installation
Please assemble the machine by arrows, especially the signs ON/OFF , OPEN /
CLOSE at the body.
To Next Page
Loading...