Aiper Pilot H2 - LED Indicator

16
9. LED Indicator
Power
On/Battery
Level
Press the
operation
button for 1s to
turn on the
device.
This device starts in
standard mode on
start-up. Press and
hold the Operations
button to switch to
the Power Mode.
In Power mode,
press the Opera-
tions button to
switch to Standard
mode.
The LED indicator will
slowly flash red.
The vacuum can
only be charged
while powered o.
Press and hold the
operation button for
2s to turn o the
vacuum.
Pulsing Light
Light o
The indicator
light is o.
The LED indicator
will display a solid
green glow when
the device is fully
charged.
The battery
indicator light will
stay on.
Vacuum
Status
Operating
Instructions
The indicator light
remains on.
Green: 100-61%
Blue: 60-31%
Red: 30-12%
Flashing red: <12%
Green: 81-99%
Blue: 51-80%
Red: < 50%
Operation
Low Battery
Charging
Power O
The white LED
indicator light
and the battery
indicator light
blink alterna-
tively.
Indicator
Light Status
Description
/
/
//