Aiphone AX SERIES - User Manual

- INSTRUCTIONS -
The AXW-AVT is designed to allow connection of a standard AX-series audio video door station (or audio-
only IE-series door station) via the AXW-AVT, conditioning the signal for use with 3
rd
party transmission
equipment (Ethernet). External video input is provided at adaptor to allow 3
rd
party camera input, output to
recording devices, etc. A motion detector or other activation device can be connected to the Sensor input to
trigger door / camera activation. The units also feature a relay output to trigger an external device, such as a
DVR or video switcher local to the AXW-AVT whenever the audio and/or video is active. Alternatively, the
AXW-AVT can be used to adapt an AX-series audio video door station to a standalone third party device
(video server, network DVR, etc).
AX Series Audio-Video Adaptor for 3
rd
Party Transmission Equipment
Pg. 1
AXW-AVT TERMINAL DEFINITIONS:
DOOR (RJ-45 Jack): RJ-45 connection from AX-series audio video door, or spliced audio only door (IE/
IF-series).
AUDIO IN/OUT: Input / Output connections for audio transmission (line level, polarity indicated by
‘+’ and ‘-’).
CALL IN/OUT: Transistor-switched input / output to be connected to relay input / output on
transmission equipment. ‘Call In’ indicates call placed by door station, ‘Call Out’
indicates master-initiated activity (polarity indicated by ‘+’ and ‘-’).
SENSOR NC, NC: Normally Closed contact input, activates ‘Call In’ function when tripped by external
motion detector or other device with N/C contacts.
RELAY NO, NO: Normally Open relay contact, activated whenever communication is active.
VIDEO IN: Composite input signal from CCTV camera, if used in place of AX-series audio
video door station.
VIDEO OUT: Composite output to external transmission equipment. Source dependent upon
CCTV / DOOR switch.
CCTV / DOOR SWITCH: Determines whether AX-series audio/video door station video (‘DOOR’ setting) or
external CCTV video (‘CCTV’ setting) will be present on ‘VIDEO OUT’ for
connection to external transmission equipment.
24V +, - 24V DC input (use Aiphone PS-2420UL).
AXW-AVT
CCTV DOOR
DOOR
OUT IN
VIDEO
AXW-AVT
AUDIO
+ -
IN OUT
+ - + -
24VOUT
+ -
CALL
SENSOR
NC NC
RELAY
NO NO
+ -
IN
Sold by:
http://www.TWAcomm.com
Toll Free: (877)
389-0000

Aiphone AX SERIES Specifications

General

Expandable	Yes
Video Monitor	Yes
Door Release	Yes
Mounting	Wall mount
Housing Material	Metal
Weather Resistance	IP54
Dimensions	Varies depending on the station. Refer to individual station specifications.
Weight	Varies depending on the station. Refer to individual station specifications.
Wiring	2-wire
Call Signal	Electronic chime

Summary

AXW-AVT Product Instructions

AXW-AVT Terminal Definitions

Defines the function and connection for each terminal on the AXW-AVT device.

AXW-AVT Configuration Diagram

AXW-AVT Configuration Notes

Provides specific notes and steps for configuring the AXW-AVT with AX-series door stations or third-party cameras.

Standalone VIP 10 S Application Considerations

Notes for using the AXW-AVT with the Bosch VIP 10S in a standalone setup.

AXW-AVT Internal Jumper Settings

Transmitting Gain (CN3)

Controls amplification for outgoing audio signal on the AXW-AVT.

Receive Gain (CN4)

Controls amplification for incoming audio signal on the AXW-AVT.

Muting Circuit (CN5)

Adjusts audio to/from the door station for full-duplex or semi-duplex operation.

AXW-AVT Specifications

AXW-AVT Wiring Distance

Specifies maximum cumulative wiring distances for the AXW-AVT connections.

FCC Class B Verification

Details compliance with FCC rules for digital devices and potential interference.