- 23 -
Technical precautions
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
•
After the unit is not used for a long time or after an extended power
failure (approx. 30 min. or more), if both the PLAY and REC buttons
light at the same time, perform the record function settings again. (P12)
• The video image may distort when the DOOR RELEASE button is
pressed. This is not a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use an abrasive cleaner or cloth.
• The entrance station is weather-resistant. However, do not spray it
directly with high-pressure water. Unit trouble could result.
• If there is a system malfunction, turn the power switch at the master
station off and back ON again. If this does not solve the problem,
unplug the DC power supply and contact a qualified technician for
service.
Technical precautions
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
•
After the unit is not used for a long time or after an extended power
failure (approx. 30 min. or more), if both the PLAY and REC buttons
light at the same time, perform the record function settings again. (P12)
• The video image may distort when the DOOR RELEASE button is
pressed. This is not a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use an abrasive cleaner or cloth.
• The entrance station is weather-resistant. However, do not spray it
directly with high-pressure water. Unit trouble could result.
• If there is a system malfunction, turn the power switch at the master
station off and back ON again. If this does not solve the problem,
unplug the DC power supply and contact a qualified technician for
service.
Nederlands
9
TECHNICAL PRECAUTIONS
TECHNICAL PRECAUTIONS
TECHNICAL PRECAUTIONS
TECHNICAL PRECAUTIONS
TECHNICAL PRECAUTIONS
Technical precautions
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
•
After the unit is not used for a long time or after an extended power
failure (approx. 30 min. or more), if both the PLAY and REC buttons
light at the same time, perform the record function settings again. (P12)
• The video image may distort when the DOOR RELEASE button is
pressed. This is not a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use an abrasive cleaner or cloth.
• The entrance station is weather-resistant. However, do not spray it
directly with high-pressure water. Unit trouble could result.
• If there is a system malfunction, turn the power switch at the master
station off and back ON again. If this does not solve the problem,
unplug the DC power supply and contact a qualified technician for
service.
Technical precautions
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
•
After the unit is not used for a long time or after an extended power
failure (approx. 30 min. or more), if both the PLAY and REC buttons
light at the same time, perform the record function settings again. (P12)
• The video image may distort when the DOOR RELEASE button is
pressed. This is not a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use an abrasive cleaner or cloth.
• The entrance station is weather-resistant. However, do not spray it
directly with high-pressure water. Unit trouble could result.
• If there is a system malfunction, turn the power switch at the master
station off and back ON again. If this does not solve the problem,
unplug the DC power supply and contact a qualified technician for
service.
Technical precautions
• Operating temperature: 0 °C to 40 °C (+32 °F to +104 °F)
•
After the unit is not used for a long time or after an extended power
failure (approx. 30 min. or more), if both the PLAY and REC buttons
light at the same time, perform the record function settings again. (P12)
• The video image may distort when the DOOR RELEASE button is
pressed. This is not a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral
household cleanser. Do not use an abrasive cleaner or cloth.
• The entrance station is weather-resistant. However, do not spray it
directly with high-pressure water. Unit trouble could result.
English
Deutsch
Français
If a sensor light is installed (local product)
1. If something is detected by the sensor (locally available product),
an alarm goes off with a sound and a warning screen. If more than
1 min. has passed after the absence set (auto absence recording)
was set, motion detection will be in operation.
2. Press the TALK button to restore. (Automatic restoration after
approx. 30 sec.)
NOTES: 1. In step 1, the length of time that the alarm sounds can be
changed. (P12)
2.
Press the TALK button to stop the alarm and warning screen.
3. Communication with the sensor light is not possible.
4. If the absence set (auto absence recording) is cancelled,
the sensor light does not call the unit, but the sensor light
continues with its surveillance function.
• In calling and communication, sensored alarm does not
come out.
• Also the alarm does not come out through Sub room
master station(s).
1. Read the instruction manual for the sensor light (local product),
or contact your local installer or dealer.
• If there is a system malfunction, turn the power switch at the master
station off and back ON again. If this does not solve the problem,
unplug the DC power supply and contact a qualified technician for
service.
Nederlands
Español
10
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Specifications
• Power: DC 18V (JB-2MED, JB-2MD, JB-2HD)
• Current consumption: (Max.) 770mA (JB-2MED)
(Max.) 670 mA (JB-2MD)
(Max.) 250 mA (JB-2HD).
• Calling: Chime and image, approx. 45 sec.
• Communication: (AUTO) Handsfree
(MANUAL) Press to talk, release to listen.
approx. 60sec
• Video monitor: 3-1/2 " direct view TFT color LCD.
• Scanning lines: 525 lines.
• Door release contact: AC 12 V, 0.35 A (dry closure contact L, L).
(Aiphone's EL-9S is recommended.)
• Dimensions: 175(H) x 115(W) x 43(D) (mm).
6-7/8 " H x 4-7/32 " W x 1-11/16 " D
• Weight: Approx. 430g (0.95lbs.) (JB-2MED)
Approx. 400 g (0.9 lbs.) (JB-2MD, JB-2HD)
English
To Next Page
Loading...
