19
TECHNICAL DATA AND PRECAUTIONS
Technical data
JP-4MED
•
Operating temperature 0 - 40°C (+32°F - +104°F)
Dimensions 255 (W) x 145 (H) x 30 (D) mm
10-1/16" (W) x 5-3/4" (H) x 1-3/16" (D)
Mass Approx. 790g (1.74 lbs.)
JPW-BA
•
Operating temperature 0 - 40°C (+32°F - +104°F)
Dimensions 123 (W) x 109 (H) x 61 (D) mm
4-7/8" (W) x 4-5/16" (H) x 2-7/16" (D)
Mass Approx. 200g (0.44 lbs.)
JP-8Z
•
Operating temperature 0 - 40°C (+32°F - +104°F)
Dimensions 123 (W) x 109 (H) x 61 (D) mm
4-7/8" (W) x 4-5/16" (H) x 2-7/16" (D)
Mass Approx. 210g (0.46 lbs.)
Technical precautions
Cleaning: Clean the units with a soft cloth and gentle cleaner. Do not spray cleaner directly on unit. Do not use an abrasive cleaner
•
or cloth.
Initializing station [INITIALIZE]
By initializing this station, all settings return to default.
Recorded images on the SD (or SDHC) card are not be
*
erased.
From th
1
e [INSTALL] menu window, touch
INITIALIZE
.
A notice message is displayed.
Touch
2
YES
to continue initializing.
To cancel initializing, touch
NO
.
When "INITIALIZATION COMPLETE" is displayed,
initializing is complete.
Identifying software version
[SOFTWARE VERSION]
You can identify the software version of the door stations,
master station and/or sub master stations connected to this
system. Use this item when doing maintenance etc.
From the [INSTALL] menu window, touch
SOFTWARE VERSION
.
The name of the door stations, master station, and/or sub
master stations connected to this system and their software
versions are displayed.
To Next Page
Loading...
