Air Conception NITRO 200 User Manual

Paramotors
NITRO 200
TORNADO 280
User’s Manual
Edition: V2.0
This manual is intended to be for informational purposes only. The manual’s content
is based on the best knowledge available at the time of publication. We put every
effort to correct the mistakes we encountered but we cannot guarantee that all
errors have been found. This is why errors found in this manual cannot be treated as
the basis for any legal claims. Information included in the present publication are the
property of the Air Conception company.
Copying, distributing, and content sharing of the whole text or its parts with third
party is not permitted without Air Conception company’s written consent. We retain
the right to make changes without notifying the users. Due to the fact that we make
constant changes in order to improve our products some parts of the manual may not
correspond to the version or the equipment of the purchased product. If this is the
case, please contact us.

Air Conception NITRO 200 Specifications

General

Brand	Air Conception
Model	NITRO 200
Category	Paramotors
Language	English

Summary

1. Introduction

1.1 Limitation of Liability

Explains potential dangers, licensing, and user responsibilities in paramotoring.

3. Fuel

4. Priming & Starting the engine

4.1 Priming the engine

Step-by-step guide to priming the engine before starting.

4.3 Emergency engine stop

Methods for stopping the engine in an emergency.

5. The run-in and the engine use

5.3 The run-in of the engine in the first hours of flight

5.4 Spark plug diagnosis

6. Pre-flight inspection and adjustments

6.1 Pre-flight paramotor inspection

Detailed checklist for inspecting the paramotor before takeoff.

7. Other maintenance operations

7.1 Pre-flight paramotor inspection

Comprehensive pre-flight checks and general condition evaluation.

9. Technical specifications of Nitro & Tornado engine