Air Conception NITRO 200 - 9. Technical specifications of Nitro & Tornado engine

19/04/2019 V2.0 Page 22 of 24
9. Technical specifications of Nitro & Tornado engine
Engine
Nitro 200 Tornado 280
Engine type Two-stroke Two-stroke
Power 28 Hp @ 7500 rpm 33 Hp @ 7500 rpm
Capacity 190 cc 268 cc
Cooling Air cooled Air cooled
Cylinder bore diameter 65 mm 73 mm
Starter
Manual or
electric starter or dual
start
Manual or
electric starter or dual
start
Carburetor WB 37 WB 37
Ignition type Inductive discharge Inductive discharge
Spark plug
NGK (BR10ES) / DENSO
(W31ESR-U) / DENSO
(IW31)
NGK (BR10ES) / DENSO
(W31ESR-U) / DENSO
(IW31)
Usable propellers
125 cm to 150 cm
Electravia 2 or 3 blades
125 cm to 150 cm
Electravia 2 or 3 blades
Max thrust at 7500 rpm 68-75 kg 78-85 kg
Gear ratio 1:2,7 1:2,62
Reduction Belt transmission Belt transmission
Power curve
Tuned for 100 % linear
throttle response.
Tuned for 100 % linear
throttle response.
Combustion at 5000 rpm 3 - 3,5 l/h 4,5 – 5 l/h
Fuel 91 Octane minimum 91 Octane minimum