To Next PageTo Next Page
Need help?Do you have a question about the Air Creation CLIPPER 582 SE and is the answer not in the manual?
Guidelines for fitting compatible wings to the trike models.
Step-by-step instructions for assembling and disassembling the trike and wing.
Critical checks to perform before every flight for safety.
Procedures for operating the trike's controls and engine.
Actions to take during various emergency scenarios.
Definition of empty weight and its impact on aircraft performance.
Details on available optional equipment and their effects.
Guidelines for specialized uses and important safety advice.
Recommended methods for safely transporting the trike.
Procedures for preparing and storing the trike.
Instructions for the initial engine break-in period.
How to adjust the propeller pitch for optimal performance.
Procedures for extended periods of storage.
General maintenance tasks and regular checks.
Scheduled maintenance tasks for every 10 flight hours.
Scheduled maintenance tasks for every 50 flight hours.
Scheduled maintenance tasks for every 100 flight hours.
Inspection procedures required after a significant landing impact.
General| Type | Ultralight Aircraft |
|---|---|
| Manufacturer | Air Creation |
| Model | CLIPPER 582 SE |
| Max Takeoff Weight | 450 kg (992 lb) |
| Gross weight | 450 kg (992 lb) |
| Engine | Rotax 582 |
| Cruise Speed | 90 km/h (56 mph, 49 kn) |
| Seating Capacity | 2 |
| Take-off distance | 100 m (328 ft) |
| Range | 300 km (186 mi, 162 nmi) |
| Fuel capacity | 40 L (8.8 imp gal; 11 US gal) |
| Stall speed | 45 km/h |
| Landing distance | 100 m |
