To Next PageTo Next Page
Need help?Do you have a question about the Air Creation GTE 503 SE and is the answer not in the manual?
Visual representations and dimensions of the trike structure.
Comparative technical specifications for different trike models.
Guidelines for fitting compatible wings to the trikes.
Step-by-step instructions for assembling and disassembling the trike and wing.
Essential checks to perform before each flight for safety and readiness.
How to operate the trike controls, engine, and ignition.
Detailed steps for starting the engine and preparing for flight.
Guidance on takeoff, maintaining level flight, and landing approaches.
Procedures for securing the aircraft after landing.
Critical actions for engine failure, fire, and other emergencies.
Information on optional equipment like luggage and parachute.
Details on CLIPPER fairing, electric starter, towing, and floats.
Safety guidelines for towing, load carriage, and sky jumping.
Procedures for transporting and storing the trike safely.
Instructions for initial engine operation and propeller pitch adjustment.
Scheduled maintenance tasks based on flight hours (10, 50, 100).
Inspections required after significant landings or potential damage.
General| Manufacturer | Air Creation |
|---|---|
| Model | GTE 503 SE |
| Engine | Rotax 503 |
| Empty Weight | 140 kg (309 lb) |
| Cruise Speed | 80 km/h (50 mph; 43 kn) |
| Stall Speed | 45 km/h (28 mph; 24 kn) |
| Rate of Climb | 3.0 m/s (590 ft/min) |
| Type | Ultralight trike |
| Engine Type | 2-cylinder, 2-stroke |
| Power | 37 kW |
| Horsepower | 50 hp |
