Air Gunsa AZ40 HTE AV User Manual

AIR GUNSA _ Anest Iwata Group - MA_AZ40HTE AV_EIRev.04
ANEST IWATA ITALIA S.r.l.
46, Corso Vigevano 10155, Torino • ITALY
Tel. diretto +39 011 - 24 80 868 Fax: +39 011 - 85 19 44
info@anest-iwata.it www.anest-iwata.it
ANEST IWATA Iberica
Calle de Les Teixidores, 3-5
08918 - Badalona (Barcelona) • SPAIN
Tel.:+34 933 20 59 93 Fax.:+34 933 20 59 65
info@anest-iwata.es www.anest-iwata.es
ANEST IWATA Europe s.r.l.
NIEDERLASSUNG DEUTSCHLAND • GERMANY
Mommsenstrasse 5, 04329 Leipzig
Telefon: +49 0341 241 44 30 Fax: +49 0341 241 443 29
info@anest-iwata.de www.anest-iwata.de
ANEST IWATA Scandinavia
Ögärdesvägen 6C, 433 30 PARTILLE • SWEDEN
Tel. +46 (0)31 - 340 28 60 Fax +46 (0)31 - 340 28 69
info@anest-iwata.se www.anest-iwata.se
ANEST IWATA France
25 rue de Madrid
38070 St Quentin Fallavier • FRANCE
Tél. +33 (0)4 - 74 94 59 69 Fax +33 (0)4 - 74 94 34 39
info@anest-iwata.fr www.anest-iwata.fr
ANEST IWATA U.K.
Unit 10 Little End Road - Eaton Socon
St. Neots - CAMBRIDGESHIRE • U.K.
PE19 8JH
Tel.: +44 (0) 1480 405419 Fax: +44 (0) 1480 217610
enquiries@anest-iwata.co.uk www.anest-iwata.co.uk
ANEST IWATA Europe S.r.l.
46, Corso Vigevano 10155, Torino • ITALY
Direct Tel. +39 011 - 22 74 402
Fax +39 011 - 22 74 406
info@anest-iwataeu.com
www.anest-iwataeu.com
ANEST IWATA USA, Inc.
9920 Windisch Road,
West Chester, OH 45069 • USA
Tel: +1 513.755.3100 Fax: +1 513.755.0888
Toll Free: 800.440.0282
inquiry@anestiwata.com www.anestiwata.com
Cormack ANEST IWATA
Unit 3, 10 Boden Road,
SEVEN HILLS NSW 2147 • AUSTRALIA
Tel: +61 2 9853 2000
Fax: +61 2 9853 2090
info@anest-iwata.com.au www.anest-iwata.com.au
Contacts:
ANEST IWATA Group
Quality Air Spray Guns Since 1944
www.air-gunsa.com
Air Gunsa S.r.l. • ITALY
46, Corso Vigevano 10155 Torino
Tel. +39 011 - 24 80 868
Fax +39 011 - 22 74 406
GB • instruction manual
• AZ40 HTE AV
European Directives:
1994/9/CE - 1999/92/CE

Air Gunsa AZ40 HTE AV Specifications

General

Operating Pressure	2.0 bar
Nozzle Size	1.3 mm
Fluid Adjustment	Yes
Pattern Adjustment	Yes
Air Inlet	1/4 inch
Material	Aluminum

Summary

Cleaning and Maintenance

Cleaning

Procedure for cleaning the spray gun after use, including flushing, soaking parts, and drying.

Maintenance

Steps for disassembling and reassembling the fluid nozzle, needle set, and air valve components for upkeep.

Troubleshooting

Gun Does Not Spray

Troubleshooting steps for when the spray gun fails to spray, checking fluid adjustment, nozzle, and filter obstructions.

Intermittent Spray Pattern

Addresses inconsistent spray patterns by checking for air leaks from the fluid nozzle and needle packing.

Defective Spray Pattern

Diagnoses reasons for poor spray patterns, such as dirty parts, nozzle damage, fluid viscosity, or output settings.

Leaking

Resolves fluid leaks by inspecting the nozzle, needle, gun body, air cap, and needle packing adjustments.

Air Escapes From Air Cap

Identifies and resolves air leaks from the air cap, checking air valve components and O-rings.