EasyManua.ls Logo

Air King AK100L - User Manual

Air King AK100L
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
SAVE THESE INSTRUCTIONS
www.airkinglimited.com
210952012 Rev. E 5-14 1 of 12
Exhaust Fan with Light
Model: AK100L
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSON, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer.If you have
questions, contact the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service
panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSON, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-related construction.
b) Sufficient air is needed for proper combustion and exhausting of
gases through the flue (chimney) of fuel burning equipment to prevent
back drafting. Follow the heating equipment manufacturer’s guideline
and safety standards such as those published by the National Fire
Protection Association (NFPA) and the American Society for Heating,
Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local
code authorities.
c) When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO
EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS.
d) Ducted fans must always be vented to the outdoors.
e) This unit must be grounded.
f) To avoid motor bearing damage and noisy and/or unbalanced impellers,
keep drywall spray, construction dust, etc. off power unit.
g) Read all instructions before installing or using exhaust fan.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DO NOT
USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
a) If this unit is to be installed over a tub or shower, it must be
marked as appropriate for the application and be connected to a
GFCI (Ground Fault Circuit Interrupter) – protected branch circuit.
b) Do not install in a ceiling with thermal insulation value greater
than R40.
WARNING: DO NOT USE IN KITCHENS.

Questions and Answers

Summary

General Safety Information

Fire, Electric Shock, and Injury Prevention

Key safety precautions for reducing fire, electric shock, and injury risks during operation and maintenance.

Installation and Electrical Safety

Safety guidelines for installation, electrical wiring, and utility protection.

Ventilation Use Caution

Limits use to general ventilation; prohibits exhausting hazardous or explosive materials and vapors.

Speed Control Device Warning

Advises against using solid-state speed control devices with this fan to prevent fire, shock, and damage.

Kitchen Use Prohibition

Prohibits the use of the fan in kitchen environments due to safety concerns.

Installation Instructions

Preparing the Exhaust Fan

Unpacking, confirming parts, and selecting the optimal location for fan installation.

Installation for New Construction

Steps for installing the housing and mounting rails in new building construction.

Installation for Existing Construction

Procedure for installing the housing and mounting rails in pre-existing structures.

Ducting Installation

Guidelines for connecting ductwork, ensuring compliance with codes and proper venting.

Electrical Wiring

Instructions for making electrical connections, including external and internal wiring methods.

Completing Installation

Use and Care

Cleaning the Grill

Instructions for safely cleaning the fan grill using mild detergent and a soft cloth.

Cleaning the Fan Assembly

Guidance on cleaning the fan unit with a dry cloth; avoid immersing electrical parts in water.

Changing Bulbs

Procedure for replacing the main bulb and night light bulb, with wattage specifications.

Troubleshooting Guide

Limited Warranty Information

Customer Service and Support

Replacement Parts Diagram

Air King AK100L Specifications

General IconGeneral
ModelAK100L
CategoryFan
Speeds3
Voltage120V
Frequency60Hz
ColorWhite

Related product manuals