EasyManua.ls Logo

Air King AK110LS User Manual

Air King AK110LS
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT
YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
1. Read all instructions before installing or using exhaust fan.
2. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing or cleaning the unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the
service panel.
4. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-related construction.
5. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA)
and the American Society for Heating, Refrigeration, and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
CAUTION: FOR GENERAL VENTILATING USE ONLY. DO
NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS
AND VAPORS.
Models:
AK80LS, AK110LS
www.airkinglimited.com
210572072 Rev. A 8-05
Exhaust Fan
SAVE THESE INSTRUCTIONS
6. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
7. Ducted fans must always be vented to the outdoors.
8. This unit must be grounded.
9. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off
power unit.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL
DEVICE.
10. Acceptable for use over a bathtub or shower when installed
in a GFCI protected branch circuit.
11. NEVER place a switch where it can be reached from a tub or
shower.
WARNING: DO NOT USE IN KITCHENS
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
1 of 8

Questions and Answers:

Air King AK110LS Specifications

General IconGeneral
BrandAir King
ModelAK110LS
CategoryFan
LanguageEnglish

Summary

General Safety Information

Basic Safety Precautions

Follow basic electrical safety precautions, including proper grounding and avoiding hazardous materials.

Electrical Installation Safety

Ensure electrical work is done by qualified persons, following codes, and avoiding damage to utilities.

Specific Usage and Installation Warnings

Adhere to warnings regarding solid-state speed control, GFCI circuits for bath/shower, and avoiding kitchen use.

Installation Instructions

Preparing the Exhaust Fan

Unpack fan, confirm parts, select location, and prepare for mounting between joists.

New Construction Installation

Install side rails on housing and position flush with finished ceiling, securing to joists.

Existing Construction Installation

Trace opening, cut ceiling material carefully, and install housing flush with finished ceiling.

Ducting Connection

Connect ducting to the fan's duct collar and ensure it is vented to the outdoors.

Wiring Connections

Ensure power is off; make electrical connections according to local codes by qualified electricians.

Completing the Installation

Reinstalling Blower Assembly

Reinstall the blower assembly if it was removed during the wiring process.

Final Assembly and Testing

Plug in the motor cord, install the grill, restore power, and test the unit.

Use and Care

Cleaning the Grill

Remove and clean the grill with mild detergent, dry thoroughly before reinstalling.

Cleaning the Fan Assembly

Wipe fan parts with a dry cloth or vacuum; never immerse electrical parts in water.

Troubleshooting Guide

Fan Not Operating

Check fuse, circuit breaker, motor plug connection, and wiring if the fan does not operate.

Slow Air Movement or Noise

Address obstructions in ducting or loose motor components causing slow air or noise.

Limited Warranty

Warranty Coverage and Limitations

One-year warranty against defects; excludes labor, shipping, and damage from misuse or improper installation.

Claim Procedure

Contact Air King for claims with proof of purchase; do not return to place of purchase.

Related product manuals