EasyManua.ls Logo

Air King ASF70 User Manual

Air King ASF70
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSON, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer.If you have
questions, contact the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service
panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
INJURY TO PERSON, OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and standards,
including fire-related construction.
b) Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent back
drafting. Follow the heating equipment manufacturer’s guideline and
safety standards such as those published by the National Fire Protection
Association (NFPA) and the American Society for Heating, Refrigeration,
and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
c) When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO
EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS.
d) Ducted fans must always be vented to the outdoors.
e) This unit must be grounded.
f) To avoid motor bearing damage and noisy and/or unbalanced impellers,
keep drywall spray, construction dust, etc. off power unit.
g) Read all instructions before installing or using exhaust fan.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DO NOT
USE THIS FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
a) If this unit is to be installed over a tub or shower, it must be
marked as appropriate for the application and be connected to a
GFCI (Ground Fault Circuit Interrupter) – protected branch circuit.
WARNING: DO NOT USE IN KITCHENS.
www.airkinglimited.com
210572120 Rev. i 11-12 1 of 12
Exhaust Fan with Light
Models: ASLC50, ASF50,
ASLC70, ASF70

Questions and Answers:

Air King ASF70 Specifications

General IconGeneral
BrandAir King
ModelASF70
CategoryFan
LanguageEnglish

Summary

GENERAL SAFETY INFORMATION

General Safety Precautions

Basic precautions for reducing fire, shock, and injury risks when using electrical appliances.

Specific Safety Warnings and Cautions

Warnings about hazardous materials, solid-state controls, kitchen use, and proper ventilation.

INSTALLATION INSTRUCTIONS

Preparing the Exhaust Fan

Steps for unpacking and preparing the exhaust fan unit for installation.

New Construction Installation

Guidance for mounting rail and tab installation in new construction scenarios.

Existing Construction Installation

Steps for installing mounting rails and housing in existing structures.

Ducting Requirements

Guidelines for connecting ductwork and venting to the outdoors as per codes.

WIRING

Fan/Light Wiring Independently

Detailed instructions for wiring the fan and light circuits separately.

Fan/Light Wiring Together

Instructions for wiring the fan and light circuits simultaneously.

COMPLETING THE INSTALLATION

Reinstall Venturi and Motor Connection

Reinstall the venturi assembly and plug the fan motor into the receptacle.

Install Grill, Reflector, and Light Bulb

Install the grill, lens, light reflector, and appropriate light bulb.

USE AND CARE

Cleaning Procedures

Instructions for cleaning the grill and fan assembly safely.

Light Bulb Replacement

Steps for safely changing the light bulb in the fan unit.

TROUBLESHOOTING

Fan Not Operating

Addresses issues where the fan fails to turn on.

Slow Airflow

Troubleshoots reduced airflow or slow fan operation.

Noisy Operation

Provides solutions for excessive noise during fan operation.

REPLACEMENT PARTS

Parts Diagram and List

Visual diagram and list of all replaceable parts for the exhaust fan.

Related product manuals